FMT NUMERIxx3 Mechanical Oval Gear Flow Meter
This precision engineered mechanical flow meter, is designed for inline installation and suitable for use with Diesel, fuel oil and low viscosity lubricants. Supplied with pre-set left to right flow direction, 1” BSP (F) inlet / outlet ports and featuring a 3-digit display and 6-digit, non-resettable totaliser. Price stated includes delivery to UK addresses.
FMT NUMERIxx3 Mechanical Oval Gear Flow Meter
This precision engineered mechanical flow meter, is designed for inline installation and suitable for use with Diesel, fuel oil and low viscosity lubricants. Supplied with factory set left to right flow direction, reconfigurable display, 1” BSP (F) inlet / outlet ports and featuring a 3-digit display and 6-digit, non-resettable totaliser.
A firm favourite with fluid dispensing technicians, this FMT Mechanical Oval Gear Flow Meter is affordable, reliable and capable of providing many years of dependable, reliable service at a wide range of installations.
- Min. – Max. Flow Rates: 2 – 100 litres per minute
- Max. Operating Pressure: 3.5 bar
- Min. – Max. Operating Temperature: -10°C to + 60 °C
- Calibration Accuracy: ± 1%
- Repeatability: ± 0.3%
- Batch Display: 3 digit Resettable with 100ml graduations
- Totaliser: 6 digit Non-Resettable
- Inlet: 1” BSP (F)
- Outlet 1” BSP (F)
- Standard Flow Orientation: Left to Right (Reconfigurable Display)
- Attachment: Wall and Panel Mountable via 4 Blind Holes in rear casing.
This product is suitable only by a suitably qualified fuel dispensing engineer in accordance with supplied instructions (attached) and prevailing statutory requirements. Fuel Tank Store Limited will not be responsible for installations which do not comply with these requirements.
|AKA Codes||23 192|
|Suitable For||Diesel (DERV)|
All products must be installed and maintained in accordance with supplied instructions and prevailing statutory requirements. Failure to comply with these requirements will invalidate any warranty supplied. Additionally:
Fuel Oil Storage Tanks All static fuel oil storage tanks must be installed and maintained by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Single Skin Heating Oil Tanks Single Skin Tanks are suitable only for the storage of Heating Oil at premises where a Bunded Tank is not required, or for installation within a suitably bunded area. Before installing any Single Skin Heating Oil Tank, a risk assessment must be completed by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Underground Heating Oil Tanks Before installing any Underground Heating Oil Tank, guidance must first be sought from your local Building Control Department. In some areas, it is not permissible to install a Heating Oil Tank belowground. Please note Aboveground Single Skin and Bunded Storage Tanks are unsuitable for belowground installation;
Plastic Storage Tanks All plastic storage tanks must be placed upon a flat, level, base which supports the underside of the tank in its entirety and extends a minimum of 300mm beyond the widest points of the tank. The base must be constructed from fire resistant materials and be capable of supporting the weight of the tank and its contents when fully laden;
Non-Potable Water Tanks Non-Potable Water Tanks are unsuitable for connection to the public water supply and the storage of water intended for human consumption.
Where applicable, all mains (230v AC) electrical connections should only be completed and periodically inspected by a suitably qualified electrician in accordance with prevailing statutory requirements. Mains electrical connections must incorporate a Residual Current Device (RCD) or similar protection to protect against the risk of electric shock.
You can call us in the UK on 01789 632 151 and in the Republic of Ireland, you can call us on 01 5268 642. We’re open from 9am to 5pm weekdays – Bank and Public Holidays excluded. You can also e-mail firstname.lastname@example.org
Damaged and Defective Products
We work closely with our manufacturing partners to ensure all our deliveries arrive with you in tip-top condition. However, very occasionally things can and sometimes do go wrong. If you receive a product you’re not happy with, please contact us as soon as possible.
We recognise that sometimes we all order products and then change our mind. So you can contact us within 14 days of receiving your completed order to let us know you wish to return any product we have supplied to you. The only exceptions are bespoke and made-to-order products. Thereafter, you have a further 14 days to return unwanted product to us. All returned items must be unused, undamaged and suitable for resale. We recommend you ensure returned items are adequately protected by insurance. Subject to returned products being undamaged and fit for resale, we will refund your purchase price within 5 working days of returned product(s) being received by us.
Please be aware that larger items (e.g. tanks) can be expensive, difficult and awkward to return. We recommend taking care to ensure you have ordered the correct product. If you’re unsure as to whether you’re ordering the correct product, you’re very welcome to contact our Customer Support Team, before placing your order.
Bespoke & Made-To-Order Products
Regretfully we are unable to accept returns of bespoke and made-to-order products, unless damaged or defective. To confirm whether a product is bespoke or made-to-order, please refer to the Product Details section.
Wish to return a product or need to notify us of a damaged or defective product? You can call us in the UK, Channel Islands and Isle of Man on 01789 632 151. In the Republic of Ireland, you can call us on 01 5268 642. You’re also welcome to email email@example.com. Our offices are open 9am to 5pm weekdays.