24v 430 litres Portable Diesel Tank - Carbery 430MP Mobi Point
24v 430 litres Portable Diesel Tank - Carbery 430MP Mobi Point
An ADR Approved Portable Diesel Tank from Carbery. Designed to strap on to the back of a Pick Up Truck, this 400 litres capacity fuel tank is ideal for refuelling plant, machinery and equipment. Supplied with 24v DC Piusi Pump, Diesel Delivery Pump, Trigger Nozzle and Lockable Equipment Access.
Carbery 430MP Mobi Point 24v DC 430 litres Portable Diesel Dispenser
Manufactured in Ireland by Carbery Plastics Limited, this mobile, low-voltage Diesel Tank is a welcome alternative to jerry cans, barrels and drums. Designed to simply strap on to the back of almost any pick-up truck, it offers you genuine, regulatory compliant, ‘go anywhere’ Diesel refuelling capability at a highly competitive price.
A 400 litres, transportable, 24v DC Diesel storage and dispensing tank, supplied complete with:
- 50lpm 24v DC Electric Fuel Transfer Pump
- 4m Battery Fly Leads
- 4m x ¾” Diesel Resistant, Fuel Dispensing Hose;
- Forecourt Standard 24mm dia. Trigger Nozzle with Automatic Shut Off;
- 2” Vent;
- 2” Fill Point;
- Lockable Flip Lid;
- Integrally-moulded Strapping Points;
- Dial Type Diesel Contents Gauge.
This Diesel Tank is suitable for the mobile storage and dispensing of Diesel fuel. Please note that when used as a static Diesel tank, this product must be placed inside a suitably bunded area.
This Carbery Mobi Point Diesel Tank is supplied as standard with a conditional, 5-year, manufacturer backed warranty against production, design and material defect.
This product complies fully with all applicable UN-ADR requirements for the carriage of Diesel fuels.
Photographs show a Carbery 430MP Mobi Point with Fuel Contents Gauge. Please be aware this item is not supplied as standard. To confirm contents gauge cost and availability, or to order, please call us in the UK, Channel Islands and Isle of Man on +44(0)1789 632 151 or in Ireland on +353(0)1 526 8642. Alternatively, e-mail firstname.lastname@example.org. We're open from 9am to 5pm weekdays - excluding Bank and Public Holidays. Please note that models supplied with a contents gauge are made to order products and cannot be returned unless damaged upon delivery or defective.
|Model Range||Carbery Mobi Points|
|Nominal Capacity||400 litres|
|Nominal Capacity (Imperial)||88 gallons|
|Suitable For||Diesel (DERV), Gas Oil|
|Fill Point Diameter||2"|
|Bund Warning Alarm||No|
|Pump Speed||50 litres per minute|
|Actual Capacity (Imperial Gallons)||92|
|Actual Capacity (Litres)||420|
All products must be installed and maintained in accordance with supplied instructions and prevailing statutory requirements. Failure to comply with these requirements will invalidate any warranty supplied. Additionally:
Fuel Oil Storage Tanks All static fuel oil storage tanks must be installed and maintained by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Single Skin Heating Oil Tanks Single Skin Tanks are suitable only for the storage of Heating Oil at premises where a Bunded Tank is not required, or for installation within a suitably bunded area. Before installing any Single Skin Heating Oil Tank, a risk assessment must be completed by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Underground Heating Oil Tanks Before installing any Underground Heating Oil Tank, guidance must first be sought from your local Building Control Department. In some areas, it is not permissible to install a Heating Oil Tank belowground. Please note Aboveground Single Skin and Bunded Storage Tanks are unsuitable for belowground installation;
Plastic Storage Tanks All plastic storage tanks must be placed upon a flat, level, base which supports the underside of the tank in its entirety and extends a minimum of 300mm beyond the widest points of the tank. The base must be constructed from fire resistant materials and be capable of supporting the weight of the tank and its contents when fully laden;
Non-Potable Water Tanks Non-Potable Water Tanks are unsuitable for connection to the public water supply and the storage of water intended for human consumption.
Where applicable, all mains (230v AC) electrical connections should only be completed and periodically inspected by a suitably qualified electrician in accordance with prevailing statutory requirements. Mains electrical connections must incorporate a Residual Current Device (RCD) or similar protection to protect against the risk of electric shock.
You can call us in the UK on 01789 632 151 and in the Republic of Ireland, you can call us on 01 5268 642. We’re open from 9am to 5pm weekdays – Bank and Public Holidays excluded. You can also e-mail email@example.com
Damaged and Defective Products
We work closely with our manufacturing partners to ensure all our deliveries arrive with you in tip-top condition. However, very occasionally things can and sometimes do go wrong. If you receive a product you’re not happy with, please contact us as soon as possible.
We recognise that sometimes we all order products and then change our mind. So you can contact us within 14 days of receiving your completed order to let us know you wish to return any product we have supplied to you. The only exceptions are bespoke and made-to-order products. Thereafter, you have a further 14 days to return unwanted product to us. All returned items must be unused, undamaged and suitable for resale. We recommend you ensure returned items are adequately protected by insurance. Subject to returned products being undamaged and fit for resale, we will refund your purchase price within 5 working days of returned product(s) being received by us.
Please be aware that larger items (e.g. tanks) can be expensive, difficult and awkward to return. We recommend taking care to ensure you have ordered the correct product. If you’re unsure as to whether you’re ordering the correct product, you’re very welcome to contact our Customer Support Team, before placing your order.
Bespoke & Made-To-Order Products
Regretfully we are unable to accept returns of bespoke and made-to-order products, unless damaged or defective. To confirm whether a product is bespoke or made-to-order, please refer to the Product Details section.
Wish to return a product or need to notify us of a damaged or defective product? You can call us in the UK, Channel Islands and Isle of Man on 01789 632 151. In the Republic of Ireland, you can call us on 01 5268 642. You’re also welcome to email firstname.lastname@example.org. Our offices are open 9am to 5pm weekdays.