230v 6,000 litres Bunded AdBlue Tank - Carbery 6000BP Blue Point

230v 6,000 litres Bunded AdBlue Tank - Carbery 6000BP Blue Point

A 6,342 litres capacity, 230 volt AC, Bunded AdBlue Storage and Dispensing Tank from Carbery Plastics. Built stronger to last longer, this 6000BP Tank complies fully with all UK and Irish AdBlue storage requirements and when fitted with the optional 2" Spill Free, Dry Break fill connection is ISO 22241 compliant. Shop and buy Carbery Bunded AdBlue Tanks online at Fuel Tank Store.

Out of stock
£5,659.13 £4,715.94
Direct to you
  • DELIVERY TIME: Delivery within 15-20 working days to most UK post code areas. Deliveries to the Republic of Ireland and UK post codes AB, BT, DD, DG, EH, FK, G, HS, GY, IM, IV, JE, KA, KW, KY, ML, PA, PH, PL, TD, TQ, TR and ZE may take longer.
  • FREE UK TAIL LIFT DELIVERY to most addresses except AB, DD, DG, EH, FK, G, HS, GY, IM, IV, JE, KA, KW, KY, ML, PA, PH, PL, TD, TQ, TR and ZE post codes, where additional carriage costs apply. Additional charge will be confirmed at check-out and before payment. Unfortunately, we cannot to deliver to Alderney, Herm, Rathlin or Sark.

    FREE REPUBLIC OF IRELAND DELIVERY to all onshore addresses. Call us on +353(0)1 526 8642 for payment and to confirm product delivery arrangements. Please note that regretfully, we are unable to deliver to offshore locations in the Republic of Ireland.
  • INTERNATIONAL DELIVERY Please call us on +44(0)1789 632 151 or e-mail hello@fueltank.store to confirm product availability, specification and carriage cost.
    All deliveries are subject to product and service availability.

Carbery 6000BP Blue Point 6,000 litres Bunded AdBlue Dispenser

Manufactured in Ireland by Carbery Plastics Limited and fully bunded, this 6,342 litres capacity Blue Point tank from Carbery Plastics Limited is engineered specifically for the storage of AdBlue solution at larger installations. 


A fully bunded 6,342 litres capacity Bunded AdBlue Storage and Dispensing Tank, supplied complete with:

  • 230v AC 35lpm Electric AdBlue Transfer Pump;
  • 6m AdBlue Resistant Delivery Hose;
  • AdBlue Resistant Suction Hose with Stainless Steel Strainer;
  • Stainless Steel Delivery Nozzle with Automatic Shut Off Function;
  • 2” (M) Plastic High Level Fill Connection; 
  • 5” Inspection Point;
  • Integral, Venting;
  • Lockable Equipment Access.

Please note this tank does not incorporate a low-level fill connection or spill-free delivery coupling as standard. Both items can be ordered as an extra cost option, where required. Please confirm product suitability with your AdBlue supplier, before placing your order. 

Product Options

This Carbery Blue Point can be supplied with the following product options, upon request and at additional cost:

  • 2" Low Level Fill Connection with Spill-Free Coupling. Designed for safer, cleaner, AdBlue deliveries and positioned within the fill cabinet, this option reduces the risks of spills during delivery. Additionally, it helps ensure compliance with ISO 22241 - the internationally recognised standard for the storage and handling of AdBlue solution;
  • Piusi Ocio Electronic Fuel Tank Contents Gauge allowing you to see how much AdBlue remains stores inside the tank;
  • Tank Heating System. A thermostatically activated heat trace system to reduce the risk of stored solution freezing in cold weather conditions;
  • Tecalemit Tank Management System A cleverly engineered Tank Management System which combines tank monitoring, user access and flow meter functions in a single, compact unit positioned inside the fill cabinet. The system supports up to 2,000 users and includes software, which allows operators to monitor and analyse AdBlue dispensing transactions, making it ideal for multi-user installations. 
To confirm option pricing and availability, please call us on +44(0)1789 632 151 and in Ireland on +353(0)1 526 8642. You can also e-mail our Customer Support Team - hello@fueltank.store Our offices are open 9am to 5pm Monday to Friday, excluding Bank and Public Holidays. 
Important Information

Please note that accompanying images may show or depict equipment available only as an extra cost option. To confirm product availability and equipment specification, please contact us prior to placing your order.

More Information
Brand Carbery Plastics
Manufacturer's Website www.carberyplastics.ie
Model Range Carbery Blue Points
SKU 6000BP
Manufacturer's Reference FPBL6000V-230AC-03
FTS Reference CP-6000BP-230
AKA Codes DV
Installation Aboveground
Material Plastic
UV Stabilised Yes
Construction Bunded
Length 290 cm
Width 240 cm
Height 240 cm
Weight 412 kgs
Suitable For AdBlue
Fill Point Diameter 2" BSP
Lockable Access Yes
Lock Supplied No
Contents Gauge Optional
Bund Warning Alarm No
Overfill Prevention No
Voltage 230v AC
Pump Speed 35 litres per minute
Filtration No
Flow Meter Yes
Actual Capacity (Imperial Gallons) 1395
Actual Capacity (Litres) 6342
Hose Reel No

General Information

All products must be installed and maintained in accordance with supplied instructions and prevailing statutory requirements. Failure to comply with these requirements will invalidate any warranty supplied. Additionally:

  • Fuel Oil Storage Tanks All static fuel oil storage tanks must be installed and maintained by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);

  • Single Skin Heating Oil Tanks Single Skin Tanks are suitable only for the storage of Heating Oil at premises where a Bunded Tank is not required, or for installation within a suitably bunded area. Before installing any Single Skin Heating Oil Tank, a risk assessment must be completed by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);

  • Underground Heating Oil Tanks Before installing any Underground Heating Oil Tank, guidance must first be sought from your local Building Control Department. In some areas, it is not permissible to install a Heating Oil Tank belowground. Please note Aboveground Single Skin and Bunded Storage Tanks are unsuitable for belowground installation;

  • Plastic Storage Tanks All plastic storage tanks must be placed upon a flat, level, base which supports the underside of the tank in its entirety and extends a minimum of 300mm beyond the widest points of the tank. The base must be constructed from fire resistant materials and be capable of supporting the weight of the tank and its contents when fully laden;

  • Non-Potable Water Tanks Non-Potable Water Tanks are unsuitable for connection to the public water supply and the storage of water intended for human consumption.

Electrical Safety

Where applicable, all mains (230v AC) electrical connections should only be completed and periodically inspected by a suitably qualified electrician in accordance with prevailing statutory requirements. Mains electrical connections must incorporate a Residual Current Device (RCD) or similar protection to protect against the risk of electric shock.

Queries? Questions?

You can call us in the UK on 01789 632 151 and in the Republic of Ireland, you can call us on 01 5268 642. We’re open from 9am to 5pm weekdays – Bank and Public Holidays excluded. You can also e-mail hello@fueltank.store

Damaged and Defective Products

We work closely with our manufacturing partners to ensure all our deliveries arrive with you in tip-top condition. However, very occasionally things can and sometimes do go wrong. If you receive a product you’re not happy with, please contact us as soon as possible.

Unwanted Products

We recognise that sometimes we all order products and then change our mind. So you can contact us within 14 days of receiving your completed order to let us know you wish to return any product we have supplied to you. The only exceptions are bespoke and made-to-order products. Thereafter, you have a further 14 days to return unwanted product to us. All returned items must be unused, undamaged and suitable for resale. We recommend you ensure returned items are adequately protected by insurance. Subject to returned products being undamaged and fit for resale, we will refund your purchase price within 5 working days of returned product(s) being received by us.

Please be aware that larger items (e.g. tanks) can be expensive, difficult and awkward to return. We recommend taking care to ensure you have ordered the correct product. If you’re unsure as to whether you’re ordering the correct product, you’re very welcome to contact our Customer Support Team, before placing your order.

Bespoke & Made-To-Order Products

Regretfully we are unable to accept returns of bespoke and made-to-order products, unless damaged or defective. To confirm whether a product is bespoke or made-to-order, please refer to the Product Details section.

Contact Us

Wish to return a product or need to notify us of a damaged or defective product? You can call us in the UK, Channel Islands and Isle of Man on 01789 632 151. In the Republic of Ireland, you can call us on 01 5268 642. You’re also welcome to email hello@fueltank.store. Our offices are open 9am to 5pm weekdays.

Write Your Own Review
You're reviewing:230v 6,000 litres Bunded AdBlue Tank - Carbery 6000BP Blue Point
Your Rating