230v 2,500 litres Bunded AdBlue Tank - Harlequin 2500SLBS-230 Blue Station Slimline
A 2,530 litres Plastic Slimline AdBlue Storage and Dispensing Tank from Harlequin. Fully bunded, this 2500SLBS Blue Station is designed for the storage of AdBlue. Made in the UK, ISO 22241 compliant and engineered to exceed all applicable UK and Irish Regulations and a flow meter can be specified upon request and at additional cost.
Harlequin 2500SLBS Blue Station 2,500 litres Bunded Slimline AdBlue Dispenser
Fully bunded, this 2,530 litres capacity Blue Station tank from Harlequin Manufacturing Limited is purpose designed for the safe, secure and environmentally responsible storage of AdBlue solution. Designed, engineered and manufactured in the UK, the 2500SLBS complies with all applicable UK and Irish AdBlue storage regulations and is ISO 22241 compliant. Featuring a compact, space-efficient design, this tank is ideal for the storage of AdBlue at premises where space is limited.
A fully bunded 2,530 litres capacity Bunded AdBlue Storage and Dispensing Tank supplied complete with:
- 230v AC 35lpm Electric AdBlue Transfer Pump;
- 6m AdBlue Resistant Delivery Hose;
- AdBlue Resistant Suction Hose with Stainless Steel Strainer;
- Stainless Steel Delivery Nozzle with Automatic Shut Off Function;
- 2” Fill Point with Dry Break Coupling;
- 4” Inspection Point;
- Integral, Venting;
- Lockable Equipment Access;
- Unitel Hydrostatic Contents Gauge.
This AdBlue tank has been engineered to ensure compliance with all applicable requirements contained within ISO 22241, the internationally recognised standard for the storage, dispensing and handling of AdBlue product.
Supplied complete with conditional, 10-year, manufacturer's storage tank warranty - excludes dispensing equipment, accessories and consumables.
|Model Range||Harlequin Blue Stations|
|Fill Point Diameter||2" Dry Break|
|Contents Gauge Type||Unitel Hydrostatic|
|Bund Warning Alarm||No|
|Actual Capacity (Imperial Gallons)||556|
|Actual Capacity (Litres)||2530|
All products must be installed and maintained in accordance with supplied instructions and prevailing statutory requirements. Failure to comply with these requirements will invalidate any warranty supplied. Additionally:
Fuel Oil Storage Tanks All static fuel oil storage tanks must be installed and maintained by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Single Skin Heating Oil Tanks Single Skin Tanks are suitable only for the storage of Heating Oil at premises where a Bunded Tank is not required, or for installation within a suitably bunded area. Before installing any Single Skin Heating Oil Tank, a risk assessment must be completed by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Underground Heating Oil Tanks Before installing any Underground Heating Oil Tank, guidance must first be sought from your local Building Control Department. In some areas, it is not permissible to install a Heating Oil Tank belowground. Please note Aboveground Single Skin and Bunded Storage Tanks are unsuitable for belowground installation;
Plastic Storage Tanks All plastic storage tanks must be placed upon a flat, level, base which supports the underside of the tank in its entirety and extends a minimum of 300mm beyond the widest points of the tank. The base must be constructed from fire resistant materials and be capable of supporting the weight of the tank and its contents when fully laden;
Non-Potable Water Tanks Non-Potable Water Tanks are unsuitable for connection to the public water supply and the storage of water intended for human consumption.
Where applicable, all mains (230v AC) electrical connections should only be completed and periodically inspected by a suitably qualified electrician in accordance with prevailing statutory requirements. Mains electrical connections must incorporate a Residual Current Device (RCD) or similar protection to protect against the risk of electric shock.
You can call us in the UK on 01789 632 151 and in the Republic of Ireland, you can call us on 01 5268 642. We’re open from 9am to 5pm weekdays – Bank and Public Holidays excluded. You can also e-mail firstname.lastname@example.org
Damaged and Defective Products
We work closely with our manufacturing partners to ensure all our deliveries arrive with you in tip-top condition. However, very occasionally things can and sometimes do go wrong. If you receive a product you’re not happy with, please contact us as soon as possible.
We recognise that sometimes we all order products and then change our mind. So you can contact us within 14 days of receiving your completed order to let us know you wish to return any product we have supplied to you. The only exceptions are bespoke and made-to-order products. Thereafter, you have a further 14 days to return unwanted product to us. All returned items must be unused, undamaged and suitable for resale. We recommend you ensure returned items are adequately protected by insurance. Subject to returned products being undamaged and fit for resale, we will refund your purchase price within 5 working days of returned product(s) being received by us.
Please be aware that larger items (e.g. tanks) can be expensive, difficult and awkward to return. We recommend taking care to ensure you have ordered the correct product. If you’re unsure as to whether you’re ordering the correct product, you’re very welcome to contact our Customer Support Team, before placing your order.
Bespoke & Made-To-Order Products
Regretfully we are unable to accept returns of bespoke and made-to-order products, unless damaged or defective. To confirm whether a product is bespoke or made-to-order, please refer to the Product Details section.
Wish to return a product or need to notify us of a damaged or defective product? You can call us in the UK, Channel Islands and Isle of Man on 01789 632 151. In the Republic of Ireland, you can call us on 01 5268 642. You’re also welcome to email email@example.com. Our offices are open 9am to 5pm weekdays.