2,500 litres Bunded Oil Tank - Carbery 2500VB Vertical
A regulatory compliant, environmentally responsible, Carbery 2500VB Vertical Bunded Plastic Heating Oil Tank. OFTEC Approved, EN 13341 compliant and supplied complete with a conditional, 10-year, Carbery warranty against manufacturing, material and design defect. Shop online for Carbery Bunded Oil Tanks today at Fuel Tank Store.
Carbery 2500VB Vertical 2,500 litres Bunded Oil Tank
Carbery’s 2,554 litres capacity 2500VB Bunded Tank is surprisingly affordable. It's an especially popular choice at agricultural and commercial fuel oil storage installations. Purpose designed for the storage of Heating Oil, like every Carbery Bunded Tank, the 2500VB is approved by the experts at OFTEC and is EN 13341 compliant - a legal requirement for all aboveground plastic heating oil tanks sold in the UK and EU today.
A 2,554 litres capacity Bunded Plastic Vertical Heating Oil Tank from Carbery supplied with:
- 1” BSP Bottom Outlet;
- Lockable Manhole Access;
- 5” Lockable Inspection Point;
- 2” BSP Fill Point;
- Contents Dipstick;
- 32mm Contents Gauge Fitting Point.
Please note this product is supplied without an oil tank fitting kit or storage tank contents gauge. An Apollo Contents Gauge and Bottom Outlet Oil Tank Fitting Kit can be purchased separately if required. Alternatively, why not check out Carbery's range of great value Ultra Bunded Heating Oil Tanks, supplied with Oil Tank Fitting Kit and Apollo Ultrasonic Oil Monitor as standard?
- OFCERT (OFS T100) licensed;
- EN 13341 compliant.
Carbery Bunded Oil Storage Tanks are suitable for the storage of Agricultural Fuel Oil, Diesel (DERV), Heating Oil, Kerosene and Paraffin, when connected to a fixed, combustion appliance e.g. oil-fired boiler, cooker etc. Please note Carbery Bunded Tanks are unsuitable for use with gravity fed, fuel delivery kits, incorporating a flexible hose and trigger nozzle.
Supplied complete with 10-year conditional, manufacturer warranty against material, manufacturing and design defect, allowing you to choose this Carbery Bunded Tank with confidence.
|Model Range||Carbery Bunded Oil Tanks|
|EN 13341 Compliant||Yes|
|OFCERT License No.||0654090601R|
|Nominal Capacity||2554 litres|
|Nominal Capacity (Imperial)||561 gallons|
|Suitable For||Agricultural Fuel Oil, Diesel (DERV), Gas Oil, Heating Oil, Kerosene|
|Fill Point Diameter||2" BSP|
|Outlet Position||Bottom Outlet|
|Outlet Diameter||1" BSP|
|Bund Warning Alarm||No|
|Interstitial Leak Detection||No|
|Tank Fitting Kit||No|
|Actual Capacity (Imperial Gallons)||591|
|Actual Capacity (Litres)||2688|
All products must be installed and maintained in accordance with supplied instructions and prevailing statutory requirements. Failure to comply with these requirements will invalidate any warranty supplied. Additionally:
Fuel Oil Storage Tanks All static fuel oil storage tanks must be installed and maintained by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Single Skin Heating Oil Tanks Single Skin Tanks are suitable only for the storage of Heating Oil at premises where a Bunded Tank is not required, or for installation within a suitably bunded area. Before installing any Single Skin Heating Oil Tank, a risk assessment must be completed by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Underground Heating Oil Tanks Before installing any Underground Heating Oil Tank, guidance must first be sought from your local Building Control Department. In some areas, it is not permissible to install a Heating Oil Tank belowground. Please note Aboveground Single Skin and Bunded Storage Tanks are unsuitable for belowground installation;
Plastic Storage Tanks All plastic storage tanks must be placed upon a flat, level, base which supports the underside of the tank in its entirety and extends a minimum of 300mm beyond the widest points of the tank. The base must be constructed from fire resistant materials and be capable of supporting the weight of the tank and its contents when fully laden;
Non-Potable Water Tanks Non-Potable Water Tanks are unsuitable for connection to the public water supply and the storage of water intended for human consumption.
Where applicable, all mains (230v AC) electrical connections should only be completed and periodically inspected by a suitably qualified electrician in accordance with prevailing statutory requirements. Mains electrical connections must incorporate a Residual Current Device (RCD) or similar protection to protect against the risk of electric shock.
You can call us in the UK on 01789 632 151 and in the Republic of Ireland, you can call us on 01 5268 642. We’re open from 9am to 5pm weekdays – Bank and Public Holidays excluded. You can also e-mail firstname.lastname@example.org
Damaged and Defective Products
We work closely with our manufacturing partners to ensure all our deliveries arrive with you in tip-top condition. However, very occasionally things can and sometimes do go wrong. If you receive a product you’re not happy with, please contact us as soon as possible.
We recognise that sometimes we all order products and then change our mind. So you can contact us within 14 days of receiving your completed order to let us know you wish to return any product we have supplied to you. The only exceptions are bespoke and made-to-order products. Thereafter, you have a further 14 days to return unwanted product to us. All returned items must be unused, undamaged and suitable for resale. We recommend you ensure returned items are adequately protected by insurance. Subject to returned products being undamaged and fit for resale, we will refund your purchase price within 5 working days of returned product(s) being received by us.
Please be aware that larger items (e.g. tanks) can be expensive, difficult and awkward to return. We recommend taking care to ensure you have ordered the correct product. If you’re unsure as to whether you’re ordering the correct product, you’re very welcome to contact our Customer Support Team, before placing your order.
Bespoke & Made-To-Order Products
Regretfully we are unable to accept returns of bespoke and made-to-order products, unless damaged or defective. To confirm whether a product is bespoke or made-to-order, please refer to the Product Details section.
Wish to return a product or need to notify us of a damaged or defective product? You can call us in the UK, Channel Islands and Isle of Man on 01789 632 151. In the Republic of Ireland, you can call us on 01 5268 642. You’re also welcome to email email@example.com. Our offices are open 9am to 5pm weekdays.