182 litres (40 Gallons) Cold Water Loft Tank with Kit – Davant BMC40R Oval
Manufactured by Davant to BS4213:2004, this stackable, 40 gallon capacity Open Top Tank is approved for the storage of Potable (Drinking) Water. Supplied with all immediate fittings as standard, for ease and speed of installation. Buy Water Cisterns online today at Fuel Tank Store.
Davant BMC40R-KIT 182 litres Oval Open Top (Stackable) Cold Water Attic Tank with Jacket, Lid and Fitting Kit
Manufactured by Davant to BS4213:2004, this stackable tank, features an open-top design for ease and speed of installation.
Manufactured from a specialist polymer approved by the Water Regulations Advisory Scheme (WRAS) and approved to BS4213:2004, this Davant Cold Water Cistern is suitable for the supply of potable water to an open vented cylinder, and expansion tanks within a vented heating system. For speed and ease of installation and access, it features an open-top design and is supplied with all required fittings, including:
- BMC40R Cold Water Cistern;
- 60mm Insulation Jacket;
- Byelaw 30/60 Kit;
- Float Pack;
- Galvanised Backing Plate.
Suitable for the storage of cold water.
All Davant Attic Tanks are supplied complete with a conditional, 1-year, conditional, manufacturer’s warranty against manufacturing, material and design defect.
|Model Range||Davant Attic / Loft Tanks|
|Installation||Attic / Loft|
|Suitable For||Non-Potable Water, Potable Water|
|Actual Capacity (Imperial Gallons)||40|
|Actual Capacity (Litres)||182|
All products must be installed and maintained in accordance with supplied instructions and prevailing statutory requirements. Failure to comply with these requirements will invalidate any warranty supplied. Additionally:
Fuel Oil Storage Tanks All static fuel oil storage tanks must be installed and maintained by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Single Skin Heating Oil Tanks Single Skin Tanks are suitable only for the storage of Heating Oil at premises where a Bunded Tank is not required, or for installation within a suitably bunded area. Before installing any Single Skin Heating Oil Tank, a risk assessment must be completed by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Underground Heating Oil Tanks Before installing any Underground Heating Oil Tank, guidance must first be sought from your local Building Control Department. In some areas, it is not permissible to install a Heating Oil Tank belowground. Please note Aboveground Single Skin and Bunded Storage Tanks are unsuitable for belowground installation;
Plastic Storage Tanks All plastic storage tanks must be placed upon a flat, level, base which supports the underside of the tank in its entirety and extends a minimum of 300mm beyond the widest points of the tank. The base must be constructed from fire resistant materials and be capable of supporting the weight of the tank and its contents when fully laden;
Non-Potable Water Tanks Non-Potable Water Tanks are unsuitable for connection to the public water supply and the storage of water intended for human consumption.
Where applicable, all mains (230v AC) electrical connections should only be completed and periodically inspected by a suitably qualified electrician in accordance with prevailing statutory requirements. Mains electrical connections must incorporate a Residual Current Device (RCD) or similar protection to protect against the risk of electric shock.
You can call us in the UK on 01789 632 151 and in the Republic of Ireland, you can call us on 01 5268 642. We’re open from 9am to 5pm weekdays – Bank and Public Holidays excluded. You can also e-mail email@example.com
Damaged and Defective Products
We work closely with our manufacturing partners to ensure all our deliveries arrive with you in tip-top condition. However, very occasionally things can and sometimes do go wrong. If you receive a product you’re not happy with, please contact us as soon as possible.
We recognise that sometimes we all order products and then change our mind. So you can contact us within 14 days of receiving your completed order to let us know you wish to return any product we have supplied to you. The only exceptions are bespoke and made-to-order products. Thereafter, you have a further 14 days to return unwanted product to us. All returned items must be unused, undamaged and suitable for resale. We recommend you ensure returned items are adequately protected by insurance. Subject to returned products being undamaged and fit for resale, we will refund your purchase price within 5 working days of returned product(s) being received by us.
Please be aware that larger items (e.g. tanks) can be expensive, difficult and awkward to return. We recommend taking care to ensure you have ordered the correct product. If you’re unsure as to whether you’re ordering the correct product, you’re very welcome to contact our Customer Support Team, before placing your order.
Bespoke & Made-To-Order Products
Regretfully we are unable to accept returns of bespoke and made-to-order products, unless damaged or defective. To confirm whether a product is bespoke or made-to-order, please refer to the Product Details section.
Wish to return a product or need to notify us of a damaged or defective product? You can call us in the UK, Channel Islands and Isle of Man on 01789 632 151. In the Republic of Ireland, you can call us on 01 5268 642. You’re also welcome to email firstname.lastname@example.org. Our offices are open 9am to 5pm weekdays.