1,450 litres Bunded Oil Tank - Harlequin 1450ITT Top Outlet Vertical
This Harlequin 1450ITT Vertical Bunded Plastic Heating Oil Tank is an inspired choice at smaller agricultural, commercial and industrial Heating Oil storage applications. Supplied with Apollo Oil Monitor, Top Outlet and Fitting Kit, like every Harlequin Bunded Tank, this 1450ITT model benefits from OFTEC approval and EN 13341 compliance. Suitable for the storage of Heating Oil and Hydrotreated Vegetable Oil (HVO). Shop and buy Harlequin Bunded Oil Tanks at Fuel Tank Store.
Harlequin 1450ITT 1,450 litres Top Outlet Plastic Vertical Bunded Heating Oil Tank
This 1,423 litres capacity 1450ITT Bunded Vertical Oil Tank from Harlequin features Atkinson’s environmentally preferred Tanktop top outlet system. OFTEC approved and EN 13341 compliant, the 1450ITT is ideal for mid-size oil-fired heating installations incorporating a pressure-jet burner. Supplied complete with Apollo Ultrasonic Heating Oil Monitor.
A 1,423 litres capacity Bunded Plastic Vertical Heating Oil Tank from Harlequin Manufacturing (formerly Clarehill Plastics Limited) supplied with:
- Lockable Manhole Access;
- Failsafe LRC Type Electronic Overfill Prevention Probe;
- 4” Lockable Inspection Point;
- 2” BSP Fill Point;
- Apollo Electronic Oil Tank Monitor;
- Factory-fitted Atkinson Tanktop Top Offtake System comprising floating suction line; non-return valve; 50 micron replaceable fuel filter; anti-siphon valve (factory set to 150mb / 1.5m –ve head); priming/purging button; and, push-fit 10mm dia. top outlet.
- OFCERT (OFS T100) licensed;
- EN 13341 compliant.
This Top Outlet Harlequin Plastic Tank is suitable for the storage of Heating Oil and Hydrotreated Vegetable Oil (HVO), when connected to a fixed, combustion appliance incorporating a pressure jet burner e.g. oil-fired boiler, cooker etc. Please note at some installations, it may be necessary to install a de-aerator or oil-lift equipment. For further guidance, please contact your oil-fired appliance manufacturer.
Supplied complete with a Harlequin Manufacturing 10-year conditional, warranty against material, manufacturing and design defect.
Please note Top Outlet Heating Oil Tanks are made to order products, exempt from out standard returns policy. Your statutory rights are not affected.
|Model Range||Harlequin ITT Bunded Heating Oil Tanks|
|AKA Codes||HQ 419241 320ENV 1450ENV|
|EN 13341 Compliant||Yes|
|OFCERT License No.||0644010903R|
|Nominal Capacity||1423 litres|
|Nominal Capacity (Imperial)||313 gallons|
|Suitable For||Agricultural Fuel Oil, Diesel (DERV), Gas Oil, Heating Oil, HVO, Kerosene|
|Fill Point Diameter||2" BSP|
|Outlet Position||Top Outlet|
|Contents Gauge Type||Apollo Ultrasonic|
|Bund Warning Alarm||No|
|Interstitial Leak Detection||No|
|Overfill Prevention Type||Electronic|
|Tank Fitting Kit||Yes|
|Actual Capacity (Imperial Gallons)||329|
|Actual Capacity (Litres)||1498|
All products must be installed and maintained in accordance with supplied instructions and prevailing statutory requirements. Failure to comply with these requirements will invalidate any warranty supplied. Additionally:
Fuel Oil Storage Tanks All static fuel oil storage tanks must be installed and maintained by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Single Skin Heating Oil Tanks Single Skin Tanks are suitable only for the storage of Heating Oil at premises where a Bunded Tank is not required, or for installation within a suitably bunded area. Before installing any Single Skin Heating Oil Tank, a risk assessment must be completed by a suitably competent person e.g. a technician registered with the Oil Firing Technical Association (OFTEC);
Underground Heating Oil Tanks Before installing any Underground Heating Oil Tank, guidance must first be sought from your local Building Control Department. In some areas, it is not permissible to install a Heating Oil Tank belowground. Please note Aboveground Single Skin and Bunded Storage Tanks are unsuitable for belowground installation;
Plastic Storage Tanks All plastic storage tanks must be placed upon a flat, level, base which supports the underside of the tank in its entirety and extends a minimum of 300mm beyond the widest points of the tank. The base must be constructed from fire resistant materials and be capable of supporting the weight of the tank and its contents when fully laden;
Non-Potable Water Tanks Non-Potable Water Tanks are unsuitable for connection to the public water supply and the storage of water intended for human consumption.
Where applicable, all mains (230v AC) electrical connections should only be completed and periodically inspected by a suitably qualified electrician in accordance with prevailing statutory requirements. Mains electrical connections must incorporate a Residual Current Device (RCD) or similar protection to protect against the risk of electric shock.
You can call us in the UK on 01789 632 151 and in the Republic of Ireland, you can call us on 01 5268 642. We’re open from 9am to 5pm weekdays – Bank and Public Holidays excluded. You can also e-mail firstname.lastname@example.org
Damaged and Defective Products
We work closely with our manufacturing partners to ensure all our deliveries arrive with you in tip-top condition. However, very occasionally things can and sometimes do go wrong. If you receive a product you’re not happy with, please contact us as soon as possible.
We recognise that sometimes we all order products and then change our mind. So you can contact us within 14 days of receiving your completed order to let us know you wish to return any product we have supplied to you. The only exceptions are bespoke and made-to-order products. Thereafter, you have a further 14 days to return unwanted product to us. All returned items must be unused, undamaged and suitable for resale. We recommend you ensure returned items are adequately protected by insurance. Subject to returned products being undamaged and fit for resale, we will refund your purchase price within 5 working days of returned product(s) being received by us.
Please be aware that larger items (e.g. tanks) can be expensive, difficult and awkward to return. We recommend taking care to ensure you have ordered the correct product. If you’re unsure as to whether you’re ordering the correct product, you’re very welcome to contact our Customer Support Team, before placing your order.
Bespoke & Made-To-Order Products
Regretfully we are unable to accept returns of bespoke and made-to-order products, unless damaged or defective. To confirm whether a product is bespoke or made-to-order, please refer to the Product Details section.
Wish to return a product or need to notify us of a damaged or defective product? You can call us in the UK, Channel Islands and Isle of Man on 01789 632 151. In the Republic of Ireland, you can call us on 01 5268 642. You’re also welcome to email email@example.com. Our offices are open 9am to 5pm weekdays.